Netgear Router Login Information
Netgear is a reliable and worldwide provider of WIFI services for homes and business. If you need to increase network connectivity in the home or business, Netgear, should be you to go to solution. They have several suppliers worldwide, and you are sure to get a provider near you and at a reasonable price. You will then need to learn on how to do the setup after purchasing the router. Netgear is not the only company that has WIFI routers for homes as there are competitors. In case you need more information on performance and use of the Netgear device, you can check at their website. The Netgear router community have all answers to any question that you may be having.
Since there are different types of Netgear devices, you will need to check detail on each model. Should you be using the Netgear Genie interface, make sure to test the article on the Netgear router for cable connection with Netgear Genie. Should you be on the DSL internet, you need to test the piece for the DSL gateway. After getting here, connect the modem to the web port on the router. Now, take the computer and connect it to the LAN port. Switch the computer, router and cable modem off and on again. Wait for them to complete the booting process. Continue to open the web browser and enter the routers IP address in the address bar and enter.
A the login prompt will be displayed on your browser. There is a default username; admin and the default password is the same password. Remember that both of these are case sensitive. Log in using these details. If they are not working, it would mean that you have changed one or both of them You will need to recall the username and password that you could have changed to. A factory reset will help if you cannot remember.
When the login is successful, click the configuration wizard, yes and next. The assistant will seek the kind of internet connection available such as the dynamic IP for cable internet connection. After clicking; next, the router will save the settings. If the provider does not provide any specific DNS information, it is prudent to retain the default settings. If you want to check whether you are attached to the web, click on the router status under maintenance. Also, you can check if you have a valid IP address in the IP address field. The IP address should not be empty or be filled with zeros. If you lose connectivity, you can read the articles on getting connectivity back. This is the simple procedure of setting up the Netgear router. Use the default date for the Netgear router login.